Filter
Top Products
In addition to the display, the printer also uses its inter-
nal beeper to alert you of problems and internal condi-
tions. Here’s a summary of the different tones:
Beep tones
Meaning
The printer has detected an error condi-
2-second tone
tion. Turn off the printer, wait a few sec-
onds and try printing again.
The printer has detected an error condl-
One long tone
tion. Turn off the printer, wait a few sec-
onds and try prlntlng again
Four short tones, repeated twice
The printer is out of paper.
The buffer has been cleared. See “ Clear-
ing the buffer” on page 43,
The top of form has been set. See “Set-
ting the top of a form” on page 35.
The quiet mode has been selected. See
One short tone
“Quiet printing” on page 37
The zoonl size has been changed. See
“Changing the zoom size” on page 40.
The Electronic DIP Switch mode has been
selected. See “Using the Electromc DIP
switches” on page 53.
The macro definition has been selected.
Two short tones
See ‘;’Saving Macros” on page 42.
The quiet mode has been cancelled. See
“Quiet printing” on page 37
The macro definition has been cancelled.
See “Removing the macro” on page 43.
Three short tones
The printer has been reset. See “Setting
the printer back to default settings” on
page 44
Hexadecimal dump mode has been
selected. See “Hexadecimal dump mode”
on page 49.
One shorter tone
Pitch lock mode has been selected See
“PItch lock” on page 45.
Font lock mode has been selected. See
“Font lock” on page 45.
Page