Filter
Top Products
Meaning
~
H-Gothic\
H-Gothic LQ font has been selected
~
The zoom mode has been selected. The message
below indicates the current size.
The current pitch size. The message below Indicates
the current size.
EDS
The electrorvc DIP switch mode is selected (see
page 53)
Font changes cannot be made from application pro-
grams. See “ Font lock” on page 45.
.
~
Changes to the font pitch cannot be made from applica-
tion programs See “ Pitch lock” on page 45.
ON
Displayed in Electronic DIP Switch mode to show the
status of the currently-selected switch. See “Changing
a switch’s value” on page 54.
m
The quiet print mode is selected. See “Quet prntlng”
on page 37.
m
The front panel settings have been saved as a macro.
See “Saving Macros” on page 42.
Pl
The short test mode has been selected. See “Short
test” otI page 47
P2
The long test mode has been selected, See “Long
test” on page 47.
Pd
The print area test mode has been selected See “ Print
area test mode” on page 48.
I-Id
The hexadecimal test dump mode has been selected.
See “Hexadecimal dump mode” on page 49.
-—
Top of form is being set manually with the control
panel. See “Setting the top of a form” on page 35.
The buffer has been cleared manually with the control
panel. See “Clearing the buffer” on page 43.
W
Dot adjustment mode has been selected. See “Adjust-
ing the dot alignment” on page 50.