Star Micronics NX-2480 Printer User Manual


 
Set bottom margin
Mom ASCII
Decimal
Hexadecimal
Both
<E SC> “N” n
27 78 rl
1P) 4E n
Sets the bottom margin to n lines, where n is between 1
and 127 in Standard mode or between 1 and 255 in IBM
‘mode. The bottom margin is reset when you change the
page length.
Cancelbottom margin
MODE ASCII
Decimal Hexadecimal
Both
<E SC> “O”
27 79
IB 4F
Cancels the bottom margin.
Form feed
MODE ASCII
Decimal Hexadecimal
Both
<FF> 12 Oc
Feeds the paper to the top of the next page according to
the current page length, and moves the print position to
the left margin. When the automatic sheet feeder (ASF)
is selected with EDS switch A6, this command ejects the
current page.
Set verticaltab stops
MODE ASCII
Decimal
Hexadecimal
Both
<E SC> “’B” nl 27 66
111 1 B 42 n 1
.n2
<o>
~1>, ~
r]2 00
Cancels all current vertical tab stops and sets new verti-
cal tab stops at lines n], n2, etc., where
nl, n2, etc. are
numbers between
1 and 255. A maximum of 16 vertical
tab stops can be set. The tab stops must be specified in
ascending order; any violation of ascending order termi-
nates the tab stop list. Standard termination is by the
<0> control code. The vertical tab stops are set in terms
of the current line spacing and do not move if the line
spacing is changed later.
Page 115