Filter
Top Products
I
Selectgraphics mode
MODE
ASCII
Decimal Hexadecimal
IBM
<E SC> “ : “ “ g“
2 ~ g 1 1~3
II? 53 67
‘nl r]2 m[1
L 1 II 2
mu
n 1 II 2 ,xO
ml ,m2
ml m2 m1 m2
Selects one of eight graphics modes depending on the
value of
mO and prints bit-image graphics in this mode.
The graphics image is (nl +
n2 x 256) – 1 dots wide. See
the <ESC> “K” command (for 8-bit graphics) or the <FS>
“Z” command (for 24-bit graphics) for information on
ml, m2, etc.
mO
Graphics mode
I 0 I 8-bit N~malden~itY
(60 dots per inch)
I
1 8-bit Double-density
(120 dots per inch)
2 8-bit Double-density, double-speed
(120 dots per inch)
3 8-bit Quadruple-density
(240 dots per inch)
8
24-bit Normal-density
(6Odots per Inch)
I 9 I 24-bit DOuble-den5ty
(120 dots per inch)
I
11 24-bit Triple-density
(180 dots per inch)
12 24-bit Hex-density
(360 dots per inch)
Convert graphics density
MODE
ASCII
Decimal Hexadecimal
Std.
<E SC> “ ? “ .~ m 27 63 n m 13 3F r] m
Converts graphics defined by subsequent <ESC> “K”,
<ESC> “L”, <ESC> “Y” or <ESC> “Z” commands to a den-
sity mode defined by <ESC> “*”.
n is “K”, “L”, “Y” or “Z”,
indicating the mode to be converted.
m is a code from
<O>to <4> or <6> indicating one of the modes of
<ESC> “*”.
Page 124