Filter
Top Products
Removing the front cover
You will need to remove the front cover (the smoked
plastic cover on the top of the printer) to install and
change ribbon cartridges. Lift the cover from the rear
using the grips on the sides, then lift up to remove the
cover from the body of the printer.
a black ribbon
Installing the ribbon cartridge
You have the choice of using a color or
with the NX-2480 Rainbow/Colour. Both ribbons are
installed and removed in the same way.
●
Take the slack out of the ribbon by turning the knob
on the ribbon cartridge clockwise (as shown by the
arrow).
Page10