Filter
Top Products
printer, the gap is narrowed (thin paper), and if you pull
it towards the front. the ~a~ is widened [thick DaDer).
As you move the lever, you can feel it click between the
six different positions. Position number 2 (starting from
the rearmost position) is the one you will generally use
for single sheets of paper (fanfold or cut sheet). Here is a
table for the adjustment lever when you use multi-part
sets.
Paper Weight of each
Thickness
Recommended
type
sheet
,
(total in mm)
;;:e;e::::;;
Single
14 to 24 Ibs (52 to 90 gsm) 0.07
to 012
2 or 3
2-part 11 to 14 Ibs (40 to 52 gsm)
012 to 014
2 or 3
3-part 11 to 14 Ibs (40 to 52 gsm)
0.18 to 0.21
3 or 4
4-part 11 to 14 Ibs (40 to 52 gsm)
0.24 to 0.28 4 or 5
5-part
11 to 14 Ibs (40 to 52 gsm) 0.30 to 0.35
5 or 6
Note: if you use multi-part sets, setup the Multi-Part setting using
the Electronic DIP switches as described in “B5 and B6 - Multi-
part mode” on page 58.
Page25