StarTech.com ECS0016 Server User Manual


  Open as PDF
of 140
 
Instruction Manual
94
LDAP Base Node: Some base node
#/bin/cong–-set=”cong.auth.ldap.basenode=somebasenode”
The following command will synchronize the live system with the new
configuration.
#/bin/cong–-run=auth
Date and Time Configuration
Manually Change Clock Settings
To change the running system time you need to issue the following com-
mands:
#date092216452005.05FormatisMMDDhhmm[[CC]YY][.ss]
Then the following command will save this new system time to the hard-
ware clock:
#/bin/hwclock–systohc
Alternately to change the hardware clock time you need to issue the fol-
lowing commands, Where the format is MMDDhhmm[[CC]YY][.ss]:
#/bin/hwclock--set--date=092216452005.05
Then the following command will save this new hardware clock time as
the system time:
#/bin/hwclock–hctosys
Network Time Protocol
To enable NTP using a server at pool.ntp.org issue the following com-
mands:
#/bin/cong–-set=cong.ntp.enabled=on
#/bin/cong–-set=cong.ntp.server=pool.ntp.org
 previous next