Filter
Top Products
Instruction Manual
76
The first step is to set up the Nagios features on the console server:
Select 1. System: Nagios on the ECS0016 Management Console.
Check to make sure the Nagios service is 2. Enabled.
Enter the IP address that the central Nagios server will use to contact 3.
the distributed ECS0016 servers in Nagios Host Address.
Enter the IP address that the distributed ECS0016 server will use to 4.
contact the central Nagios server in Nagios Server Address.
Enter the IP address that the clients running MetaConnect will use 5.
to connect through the distributed ECS0016 servers as the
MetaConnect Gateway address.
Check 6. Prefer NRPE, NRPE Enabled and NRPE Command
Arguments.
Check 7. NSCA Enabled, choose an NSCA Encryption Method and enter
and confirm an NSCA Secret. Remember these details as you will
need them later on. For NSCA Interval, enter: 5
Click 8. Apply.
Next, you must configure the attached Windows network host and specify
the services you will be checking with Nagios (HTTP and HTTPS):
Select 1. Network Hosts from the Serial & Network menu and click Add