Filter
Top Products
Instruction Manual
78
port attached. In Applicable Hosts, check the IP address/DNS
name of the IIS server.
Click 13. Connection Alert.
Click 14. Apply.
Now, you can set the console server to send alerts to the Nagios server.
Lastly you need to add a User for the client running MetaConnect:
Select 1. Users & Groups from the Serial & Network menu.
Click 2. Add User.
In Username, enter: sdtnagiosuser, then enter and confirm a Password. 3.
In 4. Accessible Hosts click the IP address/DNS name of the IIS server,
and in Accessible Ports click the serial port that has the router
console port attached
Click 5. Apply.
Enable Nagios on the ECS0016
Select 1. System: Nagios on the ECS0016 Management Console and
select Nagios service Enabled.
Enter the 2. Nagios Host Name that the ECS0016 gateway will be
referred to in the Nagios central server – this will be generated from
local System Name (entered in System: Administration) if unspecified
In Nagios Host Address enter the IP address or DNS name that the 3.
Remote
ECS0016
Gateway