StarTech.com ECS0016 Server User Manual


  Open as PDF
of 140
 
Instruction Manual
114
Adding more than one SNMP server
To add more than one SNMP server for alert traps add the first SNMP
server using the Management Console or the command line config tool.
Secondary and any further SNMP servers are added manually using
config.
Log in to the console server’s command line shell as root or an admin
user.
To set the Manager Protocol field:
congsetcong.system.snmp.protocol2=UDP or
congsetcong.system.snmp.protocol2=TCP
To set the Manager Address field:
congsetcong.system.snmp.address2=w.x.y.z ..
(replacing w.x.y.z with the IP address or DNS name).
To set the Manager Trap Port field:
congsetcong.system.snmp.trapport2=162..
(replacing 162 with the TCP/UDP port number)
To set the Version field:
congsetcong.system.snmp.version2=1or
congsetcong.system.snmp.version2=2cor
congsetcong.system.snmp.version2=3
To set the Community field (SNMP version 1 and 2c only):
congsetcong.system.snmp.community2=yourcommunityname..
(replacing yourcommunityname with the community name)
To set the Engine ID field (SNMP version 3 only):
congsetcong.system.snmp.engineid2=800000020109840301 ..
(replacing 800000020109840301 with the engine ID)
 previous next