Filter
Top Products
Instruction Manual
38
Enter a 4. UPS Name and Description (optional) and the select if the
UPS will be Connected Via USB or over pre-configured serial port or
via HTTP/HTTPS over the preconfigured network Host connection
Enter the UPS login details. This Username and Password is used by 5.
slaves of this UPS (i.e. other computers that are drawing power through
this UPS) to connect to the console server to monitor the UPS status
and shut themselves down when battery power is low. Monitoring will
typically be performed using the upsmon client running on the slave
server. See section 8.5.4 for details on setting up upsmon on slave
servers powered by the UPS
Note: These login credentials are not related the Users and access
privileges you will have configured in Serial & Networks: Users &
Groups
If you have multiple UPSes and require them to be shut down in a 6.
specific order, specify the Shutdown Order for this UPS. This is a whole