Filter
Top Products
2-14 Sun Datacenter Switch 3456 Service Manual • August 2008
FIGURE 2-11 Using Pliers to Pull a Pin
4. In one motion, use both hands to pull the pin out of the connector.
5. Dispose of the pin.
▼ Inserting Pins
When inserting pins, work from the top down. Repeat Step 1 through Step 5 for each
pin that needs to be inserted.
1. Ready the Molex tool for a pin insertion.
a. Press the trigger on the Molex tool to release the ejector.
b. Slide a pin into the opening.
A portion of the pin protrudes.
c. Activate the lock to grasp the pin.
2. Position the Molex tool over the hole in the connector where you want to insert
the pin.
3. Holding the Molex tool perpendicular to the plane of the connector, insert the
pin into the connector.