Filter
Top Products
2-20 Sun Datacenter Switch 3456 Service Manual • August 2008
FIGURE 2-14 Installing Cable Trays
Note – Install cable trays only as they are needed. If all cable trays are installed
before the switch is cabled, their presence make cabling extremely difficult.
2.4 InfiniBand Cables
2.4.1 Cable Cautions
Caution – Do not allow any IB cable to bend through a less than 5 inch (127 mm)
radius. Tight bends can break the cable internally.
Caution – Do not use zip ties to bundle or support IB cables. The sharp edges of the
ties can break the cables internally.