Filter
Top Products
Chapter 2 Chassis Service Procedures 2-25
■ If the connector stops or binds with about 2 mm still to go, back out and
repeat from Step c.
e. Continue to push the connector in until the hooks catch onto the top of the
connector on the line card.
5. Repeat from Step 2 for the second cable connecting to connector 23B.
6. Repeat from Step 2 moving to the left for cables connecting to connector 22A,
22B, 21A, and so on to 12B.
7. Repeat from Step 2 moving to the right for cables connecting to connector 0A,
0B, 1A, and so on to 11B.