Filter
Top Products
2-16 Sun Datacenter Switch 3456 Service Manual • August 2008
FIGURE 2-12 Cable Plate Locations
Note – The support rib for the plate is on the underside and visible from the front
of the switch chassis. From the back of the switch, the plates appear smooth.
b. Tighten the screws securely.
c. Repeat from Step a for the next higher cable plate and continue until all six
cable plates are installed.
2. Repeat Step 1 for the left side of the switch.
▼ Removing Cable Trees
Note – Two people are required to remove the cable trees. One person must hold
the weight of the tree for an extended time.
1. Remove all cables from the line cards.
See “Removing Cables From the Sun Datacenter Switch 3456” on page 2-22.