Filter
Top Products
Chapter 6 Fabric Card Service Procedures 6-5
6. Move your head slightly right to the next connector, and inspect its pins,
repeating Step 4 and Step 5.
7. Continue in this manner for each connector until you reach the right side of the
fabric card.
▼ Inspecting the Fans
The fans of the fabric card are FRU components. The fans secure in position with
two thumbscrews.
1. Ensure that each fan is seated properly in the fabric card.
2. Ensure that both thumbscrews are tight on each fan.
▼ Inspecting the Retainers
The two retainers on the fabric card serve three purposes:
■ Align the fabric card for proper insertion into the chassis.
■ Allow final insertion of the fabric card into the chassis and simplify the physical
connection of the fabric card connectors to the midplane connectors.
■ Allow extraction of the fabric card from the chassis and simplify the physical
disconnection of the fabric card connectors from the midplane connectors.
The retainer’s design is shown in
FIGURE 6-2.
● Ensure that the pieces of the retainer look finished, move smoothly, do not
bind, or do not feel loose or sloppy in any way.
See
FIGURE 6-2.