Filter
Top Products
Chapter 4 Fan Service Procedures 4-3
▼ Installing a Fan
1. Unwrap the replacement fan from its antistatic packaging.
2. Orient the fan over the opening in the fabric card with the LED at the bottom.
3. Slide the fan into the fabric card until the fan stops.
See
FIGURE 4-2.
FIGURE 4-2 Installing the Fan
The fan might immediately power on.
4. Tighten the captive thumbscrews to secure the fan in the fabric card.
See
FIGURE 4-2.
5. Use the checkfans and getfans commands to verify the fan’s operation.