Sun Microsystems V890 Server User Manual


 
Installation
44 Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006
Identifying installed PCI cards
If there are problems with the PCI cards, do the following to troubleshoot the problem. If all PCI
cards are operational, you can skip this procedure.
At the command prompt, enter:
/usr/platform/‘uname -m‘/sbin/prtdiag -v | pg
In the section IO Cards, there is a listing of the PCI cards. The following examples are some of
the entries you might see. The display you see depends on your specific configuration.
In this example:
Slot 0 has a Dual Ultra320 SCSI card. There are two entries for a this card because the
card has two SCSI ports.
Slot 1 has a graphics card.
Slot 6 has a Quad GigaSwift Ethernet card. There is more than one entry for this card
because the card has four ethernet ports.
.
.
========================= IO Cards =========================
Bus Max
IO Port Bus Freq Bus Dev,
Brd Type ID Side Slot MHz Freq Func State Name
Model
---- ---- ---- ---- ---- ---- ---- ---- ----- ------------------------------------------------------
I/O PCI 8 B 1 33 33 4,0 ok SUNW,XVR-100 SUNW,375-3181
I/O PCI 8 B 0 33 33 5,0 ok scsi-pci1000,30.1000.10c0.7/disk+LSI,1030
I/O PCI 8 B 0 33 33 5,1 ok scsi-pci1000,30.1000.10c0.7/disk+LSI,1030
I/O PCI 9 B 6 33 33 2,0 ok pci-pci8086,b154.0/pci (pci) PCI-BRIDGE
I/O PCI 9 B 6 33 33 0,0 ok pci-pci8086,b154.0/network (netw+ pci-bridge/pci-bridge
I/O PCI 9 B 6 33 33 0,0 ok network-pci100b,35.30 SUNW,pci-qge/pci-bridg+
I/O PCI 9 B 6 33 33 1,0 ok network-pci100b,35.30 SUNW,pci-qge/pci-bridg+
I/O PCI 9 B 6 33 33 4,0 ok pci-pci8086,b154.0/network (netw+ pci-bridge/pci-bridge
I/O PCI 9 B 6 33 33 2,0 ok network-pci100b,35.30 SUNW,pci-qge/pci-bridg+
I/O PCI 9 B 6 33 33 3,0 ok network-pci100b,35.30 SUNW,pci-qge/pci-bridg+
.
.