Filter
Top Products
Standard commands Print quality and character size
T5023/5023+ - Programming Guide 93
Width and height of character (example 'H' character):
With proportional spacing the different widths of the individual characters are ta-
ken into consideration, for example, the character ’i’ is narrower than the charac-
ter ’w’, i. e. the print width of the character ’i’ in proportional spacing is smaller
than that of the character ’w’. Irregular spaces between the individual characters
of a word are thus removed. The character width in proportional spacing varies
between 1.0 and 2.6 mm. The size of the characters is 10 cpi. The print quality
is switched to LQ.
font
10 cpi
width/
height
12 cpi
width/
height
15 cpi
width/
height
proportio-
nal
width/
height
LQ-Sans Serif 2.0/2.6 mm 1.7/2.6 mm 1.4/1.9 mm 1.9/2.6 mm
LQ-Roman 2.3/2.5 mm 2.0/2.5 mm 1.5/1.8 mm 2.1/2.5 mm
DQ 1.8/2.5 mm 1.6/2.5 mm 1.4/1.9 mm