Filter
Top Products
Standard commands Horizontal print control
T5023/5023+ - Programming Guide 83
– After switching on or initializing the printer (ESC @) the text align-
ment is flush left (n = 0).
– In most programming languages there are print commands, which,
after the output of the printed text, automatically carry out the CR
or LF command (for example, PRINTLF).
– The control commands HT (Horizontal tabulation) and BS
(Backspace) are without effect with centered and flush right text ali-
gnment or with margin justification.
– ESC a (n) should be entered at the beginning of a print line, as
ESC a (n) deletes all the previously entered characters in the same
print line.
i