Filter
Top Products
Loadable Firmware/Character Generators Load Functions: General
T5023/5023+ - Programming Guide 277
The load process is identical for all data to be loaded. A process begins with the
request for the data ID using the escape sequence ESC I D. This indicates
whether modules are loaded and which version is available.
If the relevant module has not been loaded or if the versions do not match, the
appropriate pre-command will be transferred in the second step.
Then the appropriate module can be transferred.
After the completion of the load process the complete file ID is transferred as an
acknowledgment. This indicates whether the new module has been transferred
correctly.
Module Identification
Every loadable data file can be identified by an ID. The file ID has the following
structure:
Length Contents Meaning
5 $xxx$ Identifier $MOD$
1 blank Separator
6 yymmdd Release date in the format YYMMDD (941101 for
1.11.94)
1 blank Separator
4 xxxx Version ID of the release (0105 for V01.05)
1 blank Separator
8 a..a Module name (e.g. "5023_STD", "CP15_437")
1 . Separator (point)
3 a.a Extension (MOD, FRM, FNT)
1 : or ; Separator ":" or end character ";"