Filter
Top Products
Processing of a blank form Application examples
246
T5023/5023+ - Programming Guide
18. Determining additional spacing between characters
Command: ESC SP (n)
Parameter: n = 12
Remarks: SP = space stands for the blank space (ASCII
= hex 20 or decimal 32 and EBCDIC = hex 40
or decimal 64). Via n = 12 in LQ mode, an ad-
ditional character spacing of 12/180 inch is
determined. In draft mode this would be
12/120 inch.
19.
Printing reference line
20.
Deleting additional spacing between the characters
Command: ESC SP (n)
Parameter: n = 0 (Default value)
21.
Switching off italic print
Command: ESC 5
22.
Vertical tabulation to start of text
Command: VT
23.
Printing text from ’Dear Mr ...’ to ’... query about the type of’
24.
Switchingonboldprint
Command: ESC E
25.
Printing text ’connector for the RS- 232 interface’