Tally Genicom T5023 Printer User Manual


 
Additional commands (Printer) Basic commands for document processing
T5023/5023+ - Programming Guide 205
Dual station control
Parameter:
Function:
The ’Dual station control’ for the document printer can be activated using this
command. In this way the control of workstations using a common printer can be
synchronized.
Using the command CSI n * t USER1 and USER2 LEDs can be switched over
in the application program in order to indicate, for example, which job is being
processed or which operator is to insert a form. In order to receive a response
from the respective operator, the use of the USER 1 or USER 2 key can be re-
quested via the ’Special printer messages’ (request via CSI " z, see section “Sta-
tus and error messages” in this chapter).
CSI
ESC
27
1B
[
91
5B
n
n
n
n
*
*
42
2A
t
t
116
74
Name
ASCII character
Decimal
Hexadecimal
Dual station control USER1 LED USER2 LED
n = 0 : de-activated; default value
n=1: activated off off
n=2: activated on off
n=3: activated off on
n=4: activated on on
In order to receive a ’Special printer message’ on the status of the
USER 1 or USER 2 keys, the “Dual station control” must be activa-
ted using CSI n * t (n
1).
After initializing the printer the ’Dual station control’ is de-activated.
i