Filter
Top Products
27
D13898.07
NOVEMBER 2008
TANDBERG CONTENT SERVER
ADMINISTRATOR GUIDE
Table of
Contents
Introduction Installation Quick Setup
TCS
Administration
Backing up and
Restoring
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
Backing Up Your Content Server
About Backing up The Backup Procedure
The backup procedure described here will back up your
application, database, media and all settings.
This full backup differs from the partial backup tool used in S2.0
which only backed up the database.
This procedure alllows you to make one-off as well as scheduled
backups. We recommend regular backups, and making a special
one-off backup before upgrading your Content Server.
It is very important to follow the restore procedure as described
here, otherwise future upgrades may not work.
You will need a USB Hard drive with enough space for all les
to be backed up. Check the total size of the les to be
backed up on your Content Server (in My Computer). You
can also back up to a network location.
If you are not backing up to a network location, connect
a USB hard drive to a USB port on the Content Server. If
the USB device does not appear in My Computer, go to
Computer Management and assign a drive letter which
does not conflict with the existing drives (eg. F).
Login to the web interface using Internet Explorer and
select Windows Server from the Administrator Settings
menu.
If you are not using Internet Explorer, you can also open
the Backup Wizard from a Remote Desktop session. Go
to Start > All Programs > Accessories > System Tools >
Backup
Click on the Maintenance tab, then select the Backup link.
Authenticate to open a Remote Desktop connection. If
your Internet Explorer 7 settings prevent you from running
Active X scripts, you may need to add the Content Server
to your Trusted Sites list in IE.
Start the Backup and Restore Wizard.
more...
Before You Start
Before attempting backup, check in Add/Remove programs that
you have Windows Server 2003 Service Pack installed. Please
ensure that Service Pack 2 is installed on the Content Server
before proceeding with backup.
Visit http://www.tandberg.com/support/tandberg_device_
security.jsp for instructions on how to install Microsoft Windows
Server 2003 Service Pack 2 on the TANDBERG Content Server.