Filter
Top Products
Command Descriptions
3–42
Option 01 VXI Interface Module User Manual
OUTPut
OUTPut
:TTLTrg<n>
[:STATe] ON | OFF | <nrf>
OUTPut
:TTLTrg<n>
[:STATe]?
Indicates whether a VXI TTL trigger is enabled.
All VXI TTL triggers are disabled.
ROUTe:CLOSe
ROUTe:SCAN
One or more VXI TTL triggers may be enabled. Triggers that are enabled are
pulsed low for 3 msec after a relay is closed by the Option 01 after a time
specified by the ROUTe:CLOSe:DWELl command.
Command Response
output:ttltrg1:state
on
Enable driving VXI TTL trigger 1.
outp:ttlt2 off Disable driving VXI TTL trigger 2.
outp:ttlt7:stat 1 Enable driving VXI TTL trigger 7.
output:ttltrg4:state? 1
This response indicates that VXI TTL trigger 4 is enabled.
Command Syntax
Query Syntax
Query Response
*RST Value
Related Commands
Description
Examples