Filter
Top Products
Chapter 8
SpeedTouch™ Remote Access
E-DOC-CTC-20051017-0155 v1.0
108
8.8 CPE WAN Management Protocol (CWMP)
Support (TR-069)
About CWMP The SpeedTouch™ supports the DSL Forum’s TR-069 Technical Report on CWMP.
This allows the SpeedTouch™ to be configured and monitored from a management
application running on a remote Auto-Configuration Server (ACS). For more
information, refer to the DSL Forum’s technical report TR-069 “CPE WAN
Management Protocol”.
Architecture The diagram below shows the CWMP architecture for the SpeedTouch™:
Supported Features The TR-069 functionality as supported by the SpeedTouch™ has the following
features:
Start-up mechanism (including Remote Inventory) with support of SSL and
DNS name resolution for ACS
Transfer of files (firmware, configuration file, script file).
Data model supporting the following use cases: auto-provisioning, integrated
service activation, wireless LAN, diagnostics.
Configuration Options It is impossible to configure the CWMP parameters via the Web interface. Only CLI
commands can be used.
In any regular scenario, the ACS sets all connection request parameters to
their required values when the SpeedTouch™ connects to the ACS for the
first time.
ACS Server
DSLAM BRAS
SpeedTouch
Customer premises network
ISP-1
ACS