Filter
Top Products
Chapter 4
SpeedTouch™ Configuration Management
E-DOC-CTC-20051017-0155 v1.0
34
As a result the configuration file, containing a saved SpeedTouch™ configuration
will be stored on the location from where you started the FTP session.
6 Optionally, you can make a listing of the subdirectory’s contents:
ftp> dir
200 Connected to 192.168.1.254
150 Opening data connection for /bin/ls
-rwxrwxrwx 1 0 0 20 Jun 29 1971 start.cmd
-rwxrwxrwx 1 0 0 2952448 Jun 29 1971 ZZUIAA5.314
-r--r--r-- 1 0 0 9 Jun 29 1971 seed.dat
-r--r--r-- 1 0 0 729 Jun 29 1971 sslcert.pem
-r--r--r-- 1 0 0 908 Jun 29 1971 sslkey.pem
-r--r--r-- 1 0 0 692 Jun 29 1971 sshdsa.pem
-rwxrwxrwx 1 0 0 66920 Jun 29 1971 user.ini
-rw-rw-rw- 1 0 0 4056 Jun 29 1971 user.tpl
-rw-rw-r-- 1 0 0 34633 Jun 29 1971 security.cfg
226 Options: -l : 9 matches total
ftp: 600 bytes received in 0,00Seconds 600000,00Kbytes/
sec.ftp: 400 bytes received in 0.01Seconds 40.00Kbytes/sec.
The configuration you saved in step 2 is stored in the user.ini file.
Other configuration files (stored via the
:config save and
:config backup CLI commands) may be found.
7 Get the configuration file (in the example the saved configuration file
user.ini is backed up):
ftp> get user.ini
200 Connected to 192.168.1.254 port 1693
150 Opening data connection for user.ini (12016)
#####
226 File transfer complete
ftp: 12016 bytes received in 0.02Seconds 600.80Kbytes/sec.
Step Action