Filter
Top Products
Chapter 10
SpeedTouch™ Monitoring
E-DOC-CTC-20051017-0155 v1.0
144
How to Configure the
SNMPv1 Traps
Proceed as follows:
Step Action
1 Create a new target:
:snmp target add name=Test_trap_pc addr=10.0.0.110
taglist=Trap_tag params=Trap_params
2 Create a notify filter:
:snmp notify add name=trap_notify_test tag=Trap_tag
3 Configure the target parameters:
:snmp targetparams add paramname=Trap_params mpmodel=v1
securitymodel=snmpv1 securityname=RWCommunity
securitylevel=noAuthNoPriv
4 Enable traps:
:snmp config traps enabled
5 Allow the traps to be sent to the target:
:service system modify name SNMPV3_TRAPS state enabled