Filter
Top Products
Chapter 12
SLA Monitoring.
E-DOC-CTC-20051017-0155 v1.0
195
Use the following command to modify the SLA ping parameters:
Starting the SLA Ping The SLA Ping process has been configured now. You now need to start the process,
to do so, use the following command:
SLA Ping Result Now that the SLA ping process has been started you can view the SLA ping results.
Use the following command:
=>:sla ping modify
test = internet
[addr] = 11.0.0.138
[size] = 200
[timeout] = 3
[count] = 15
[datafill] = test
[frequency] = 2
[maxrow] = 50
[storagetype] = nonVolatile
[trap] =
[trapprobefilter] = 2
[traptestfilter] = 12
[type] = IcmpEcho
[descr] =
[srcaddr] = 0.0.0.0
[intf] = lan1
[bypassrt] = disabled
[dsfield] = 0
:sla ping modify test=internet size=200 count=15 datafill=test
frequency=2 trapprobefilter=2 traptestfilter=12 intf=lan1
=>
=>:sla ping start test=internet
=>
=>:sla ping list
internet : [owner = modem] dest = 11.0.0.138
size = 200 timeout[s] = 3 count = 15
datafill = test
frequency[s] = 2 maxrows = 50
trapflag =
probefailfilter = 2 testfailfilter = 12
type = IcmpEcho storagetype = nonVolatile
descr =
srcaddr = 0.0.0.0
intf = wan1 bypassrt = no dsfield = 0
result Info
status = in progress
minrtt[us] = 1104 maxrtt[us] = 8910
avgrtt[us] = 5006 rttsumofsqr[ms] = 130
responses = 4 sentprobes = 4
lastgoodresponse = 02/01/70 04:33:00.306942
=>