Filter
Top Products
Chapter 12
SLA Monitoring.
E-DOC-CTC-20051017-0155 v1.0
194
Now that we defined an SLA ping test we need to configure the test. The following
parameters can be configured:
Parameter Description Values
test The name of the ping test to
configure.
string
addr The destination IP address. string
size The size of the data portion to
be transmitted in a ping probe.
number{0-20000}
timeout The timeout value, in seconds,
for a ping operation
number{1-60}
count The number of times to send a
ping probe.
number{1-15}
datafill The data fill pattern of a probe
packet.
quoted string
frequency The number of seconds to wait
before repeating a ping test.
number{0-65535}
maxrow The max number of entries in
the history table.
number{0-50}
storagetype The storage type of this entry. volatile or
nonVolatile
trap The value determines when
and if to generate a
notification.
[+/-]flag[+/-flag...]
probeFailure
testFailure
testCompletion
trapprobefilter The number of successive
probe failures before initiating
a pingProbeFailed notification.
number{0-15}
traptestfilter The number of ping failures
within one test before initiating
a pingTestFailed notification.
number{0-15}
type The implementation method to
be used for the ping test.
IcmpEcho or
UdpEcho
descr The descriptive name of the
ping test.
quoted string
srcaddr Ip source address to be used. ip-address
intf Interface name. none|loop|ipsec0|In
ternet|lan1|wan1|d
mz1|guest1
bypassrt Bypass the normal routing
tables.
disabled or enabled
dsfield The value to store in the
Differentiated Service Field in
the IP packet
number{0-255}