Filter
Top Products
Chapter 13
Resetting the SpeedTouch™
E-DOC-CTC-20051017-0155 v1.0
204
The Reset button On the back side of the SpeedTouch™ there is a resetbutton. By pressing this button
for three to six seconds the device will reboot and startup with the settings defined
in the isp.def if present.
The reset button can be disabled by executing the following command:
This command will disable the reset button on the back of the SpeedTouch™. In
case of problems proceed as follows to enable the reset button again:
=>:system config resetbutton=disabled
Step Action
1
Switch off the SpeedTouch™.
2 Press and hold the reset button.
3 Switch on the SpeedTouch™.
4 Keep the reset button pushed in for ca. 30 seconds.
5 Release the reset button.