Filter
Top Products
Chapter 7
The SpeedTouch™ File System
E-DOC-CTC-20051017-0155 v1.0
78
File types Following file types can be found:
System software files (e.g. ZZUIAA5.321)
The SpeedTouch™ system software file. The one in the ‘/active’ directory is
currently used by the SpeedTouch™; the one in the ‘/dl’ directory is dormant.
Software activation keys(e.g. VPN256-32.swk)
Software key files allowing the SpeedTouch™ to enable the corresponding
software module at startup. Per enabled software module, a software key
must be present in the ‘/dl’ directory.
Configuration files (e.g. user.ini)
The most recent saved configuration of the SpeedTouch™, or alternative
dormant configuration files, manually stored on the SpeedTouch™. At start-up
the SpeedTouch™ will load the user.ini configuration file residing in the ‘/dl’
directory.
Default configuration files (e.g. isp.def)
Depending on your ISP’s or network administrator’s preferences, your
SpeedTouch™ may have a deviant default configuration after a reset. The
isp.def file, if present, reflects this deviant default configuration.
Template files (e.g. custom.tpl)
Service template file, used by the embedded Easy Setup wizard.
Language-pack files (e.g. German.lng)
Files, allowing to view the SpeedTouch™ Web Interface in a local language.
Per
selectable language a language pack file should be available.
Secure storage files (e.g. ss_p12.dat)
Secure storage data files, containing certificate information for the
SpeedTouch™ IP Security VPN module (if enabled).
Flag and system files (e.g. build.flg, config.inf, start.cmd)
Protected files, created by the SpeedTouch™ for file system and startup
management. For proper operation, do not change or delete these files in any
way.
Script files (.sts)