Filter
Top Products
User’s Manual EN-12
TOSHIBA FOLIO 100
Turning on the power
This section describes how to turn on the power - the Power/Battery
indicator will then indicate the status.
Press the power button at the top of the device to turn on the power.
(Sample Illustration) Turn on the device
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the
power. Setup your device according to the following steps:
1. In Language/Date & Time Settings, choose the language as you want
and then set the time zone, date and time. Tap Next to continue.
2. In Wi-Fi Settings, turn on the Wifi. Choose an available network and
connect to it. Tap Next to continue.
You may also skip this section and turn Wifi on later in Settings
window.
3. In EULA Agreement, tap I accept and then tap Finish setup to
complete the whole setup process.
Device options menu
The device provides you with an option menu where you can quickly
change the mode of your device:
To open the Device options menu, press the power button for about two
seconds. The menu will be displayed with the following options: Silent
mode, Airplane mode, Power off and Suspend.
■ After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section Initial
Setup for more information.
2 PIN
3 PIN