Filter
Top Products
User’s Manual EN-74
TOSHIBA FOLIO 100
HDMI device
The device is equipped with an HDMI out port that can send video by
connecting with external devices. 1080p, 720p, 576p and 480p signal
formats are supported, but actually available signal format depends on
each HDMI device.
To connect external devices, follow the steps as detailed below:
1. Plug one end of the HDMI cable into the HDMI port of the HDMI
device.
2. Plug the other end of the HDMI cable into the HDMI out port on your
device.
(Sample Illustration) Connecting a HDMI cable
■ This device does not support a printer connected to the USB port.
■ This device only support external USB HDD (FAT only) and USB Flash
Memory (FAT only) for data copy.
■ Though USB hubs, USB flash memory and USB HDDs are also
supported, the proper function and behavior of all such devices is not
guaranteed.
■ If the USB device you connected is not supported by this device, a
notification will be shown.
■ This device supports FAT12/16/32 format for USB memory and USB
hard drives.
As the port operation of all HDMI (High-Definition Multimedia Interface)
monitors has not been confirmed, some HDMI monitors may not function
properly.
1. HDMI out port
2. HDMI cable
1
2
■ When you connect a television or external monitor to the HDMI port
and the display mode will be changed to mirror mode. When you
unplug the HDMI cable and re-plug it in please wait at least 5 seconds
before you replug the HDMI cable again.