Filter
Top Products
1
2
3
4
5
6
7
9
10
11
12
8
7-4
WHEN THE GRAPHIC SYMBOL FLASHES
B
A
1
Pulling up the grip, draw out the large-capacity
feeder carefully until it comes to a stop.
2
Open some paper packages, take out entire reams
of paper and set them aligned in tray and tray .
• When setting the paper, set the paper for to the right
aside, and set it for to the left aside. (The paper can be
set neatly if you pile up the paper little by little alternately in
the tray
and .) Be sure that the centre lever is not open
(Refer to the labels attached in the large-capacity feeder).
• Do not add paper above the line indicated on the guide.
• Up to 2500 sheets of paper (recommended by Toshiba) can
be set.
• Paper starts being fed from the elevator tray
at first, and
when it runs out of paper, the paper on tray moves to the
position
.
• Do not use creased, folded, wrinkled or damp sheets of pa-
per.
2. LOADING PAPER (Cont.)
Adding Paper to the Large-Capacity Feeder (option for e-STUDIO20/25)
3
Close the cover of the large-capacity feeder.
• Close the cover completely. The elevator tray automatically
moves up to the paper feeding position.