Filter
Top Products
8-9
1
2
3
4
5
6
7
9
10
11
12
8
7. SPEAKER TEST
The speaker test checks speaker operation by changing the volume output from the speaker.
1
Press the key to enter the program menu.
2
Select “05.TEST MODE” and press the key.
3
Select “02.INDIVIDUAL TEST” and press the key.
4
Select “05.SPEAKER TEST” and press the key.
5
Select the speaker volume level by using the
key or key.
• Level 0 produces on sound, and Level 7 the maximum
volume. Speaker sound is output at the volume level
selected. Check that all the volumes are output normally.
6
After checking, press the key.
7
If the volumes are output normally, select “1.OK” and
press the key.
If even one of them is not output normally, select
“2.NG” and press the key.
• The results of the SPEAKER test can be confirmed with the
self test report. Page 8-12
• If the result of the SPEAKER test is judged to be NG, call
your service representative.
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
04.MENU LIST
05.TEST MODE
TEST MODE
01.AUTO TEST
02.INDIVIDUAL TEST
03.TEST RESULT LIST
INDIVIDUAL TEST
01.ADF TEST
02.KEY TEST
03.LED TEST
04.LCD TEST
05.SPEAKER TEST
06.SWITCH TEST
07.TEST PRINT
SPEAKER TEST
ENTER TEST RESULT
1.OK
2.NG
SPEAKER TEST
VOLUME: 7
3
STOP TO COMPLETE 0