Toshiba E-STUDIO281C Copier User Manual


 
e-STUDIO281c/351c/451c
PCL6 PCL5c PS3 Mac
(2) Change the value for an appropriate code in adjustment mode [05] to adjust the color balance or gamma
curve balance.
* The [05] code to use varies, depending on whether to adjust the image quality in full-color printing or
black-and-white printing. Use either of the procedures below appropriate to a type of original to print.
To adjust the image quality in full-color printing
("Automatic" is selected from among the "Color" options on the PCL5c or PS3 printer driver. "Color" is
selected from among the "Color Resolution Type" options on the Macintosh printer driver.)
Use steps (a) to (b) to adjust the color balance.
* The "Color" options are available in the "Setup" tab on the PCL5c and PS3 printer drivers. The "Color
Resolution Type" is available in the "Quality" menu on the Macintosh printer driver.
(a) Enter adjustment mode [05]. Select code [395]. Press the [START] button.
Image quality control will be forcibly performed to correct variations in image contrast.
(b) Enter adjustment mode [05]. Change the values for codes [1014 to 1017], [1022 to 1025], [1030 to 1033]
or [1038 to 1041] to adjust the color balance and increase the color density.
• Adjust the values for the [05] codes corresponding to the print options to be applied (PDL, Resolution
and Halftone).
Ex.: • When printing on Windows is performed with the following options selected: PCL5c, 600 x 600,
Image Quality Type = Presentation, Halftone =Detail)
> Change the values for Y: 05-1030, M: 05-1031, C: 05-1032 and K: 05-1033.
• When printing on Macintosh is with the following option selected: Color Low-res (= 600 x 600),
LineArt (Halftone = Detail):
> Change the values for Y: 05-1014, M: 05-1015, C: 05-1016 and K: 05-1017.
* Printing on Macintosh is performed in PostScript. (See the "PS3" row in the table below.)
* The resolution option on the Macintosh printer driver is "Low-res" (= 600 x 600) or "High-res" (= 1200 x 600).
3. Printer-specific Adjustments
3.7