Toshiba E-STUDIO281C Copier User Manual


 
e-STUDIO281c/351c/451c
1.2.2
To Adjust the Light Image at the Trailing Edge/Splattering of Toner
(1) Enter adjustment mode [05]. Change the value for code [293] or [1822] to adjust the transfer roller bias
output at the trailing edge of the paper. (Adjust the ratio (%) of the transfer roller bias output at the center to
the trailing edge of the paper, in order to ensure a uniform density between them.)
• The code to use varies, according to a type of paper used. Adjust the value for the [05] code corresponding to
the paper type for which you would like to improve the image quality. Set the value within the recommended
value range, in order to ensure a uniform density between the center and trailing edge of the paper.
Use steps (a) to (b) to adjust the transfer roller bias output.
* The adjustment ranges of the transfer roller bias output at the trailing edge of the paper are as illustrated
below.
(a) Enter adjustment mode [05]. Change the value for code [293] to correct the transfer roller bias
output at the trailing edge of the paper in adjustment range A.
Paper type [05] code Subcode
Value
recommended
Acceptable
value range
Default
Plain paper 0 85
Thick 1 1 75
Thick 2 2 80
Thick 3 3 80
OHP
05-293
4
60 to 85 0 to 100
80
Adjustment range B (05-1822)
Adjustment range A (05-293)
Printing direction
1. General Adjustments – Copying, Printing and e-Filing (Output from Box)
1.2