Toshiba E-STUDIO281C Copier User Manual


 
e-STUDIO281c/351c/451c
(4) Adjust the background peak of range correction to lighten the copy image.
Use steps (a) to (b) to adjust the background peak of range correction.
(a) Enter adjustment mode [05]. Change the values for codes [570 to 572] or [693 to 695] to set the
background peak of range correction to "fixed."
The code to use varies, according to the density option (auto or manual), original mode, (Text/Photo,
Photo or Text) and use of the RADF (MR-3018). Adjust the value for the [05] code corresponding to
the condition for which you would like to improve the image quality and set "1" in one or ten place.
* Set value (Ex.: To set the background/text peak in manual and auto copy density mode to "fixed")
Value Background peak Text peak
1 Fixed Fixed
2 Varied Fixed
3 Fixed Varied
4 Varied Varied
To scan an original manually placed on the original glass
Value recommended Default Original
mode
[05] code
Copy density
mode
Ten place One place Ten place One place
Manual 1
Current value
Text/Photo 05-570
Auto
Current value
1
2 2
Manual 1
Current value
Photo 05-571
Auto
Current value
1
1 2
Manual 1
Current value
Text 05-572
Auto
Current value
1
2 2
To scan an original fed from the RADF
Value recommended Default Original
mode
[05] code
Copy density
mode
Ten place One place Ten place One place
Manual 1
Current value
Text/Photo 05-693
Auto
Current value
1
2 2
Manual 1
Current value
Photo 05-694
Auto
Current value
1
1 2
Manual 1
Current value
Text 05-695
Auto
Current value
1
2 2
2. Copier-specific Adjustments
2.6
Ten place: Set the background/text peak in manual copy density mode to "fixed" — See the
table below for further information.
One place: Set the background/text peak in auto copy density mode to "fixed" — See the table
below for further information.
1 1