Filter
Top Products
e-STUDIO281c/351c/451c
2.10 To Make Photo Edges Look Softer
Before the adjustment
After the adjustment
The edges (contours) of the image are highly
visible.
The edges look soft.
Explanation
When a photo image is copied, the contours or edges of the image sometimes become highly visible on the copy.
Perform an adjustment regarding the image processing (sharpness intensity), in order to soften the edges of the
image.
Procedures
* You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed
below. You can use one procedure in conjunction with another. But if this changes the image quality more
than required or loses effectiveness of the adjustment, restore the settings made in the previously used
procedure to the original. Then perform the next procedure.
* Procedures (1) and (2) are used by the service technician, and by the user.
* Procedures (3) to (5) are used by the service technician only.
2. Copier-specific Adjustments
2.10