Filter
Top Products
April, 2007 SERVICE PROGRAM TABLES
5-59
2531
Thk:K:LL Thick Paper: K Low
2532
Thk:K:ML Thick Paper: K Medium Low
2533
Thk:K:MM Thick Paper: K Medium
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute humidity from
the temperature/humidity sensor and the thresholds set with SP2304 001
SP2431 – Up to SP2304 001: Threshold 1
SP2432 – More than SP2304 001 Threshold 1, up to SP2304 002 Threshold 2.
SP2433 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3
These settings apply only to the image area printed on thick paper in black-and-
white mode at half-speed (128~256 g/m
2
).
SP2531 SP2532 SP2533
007
Side1:PTR [10~250/1%] [10~250/1%] [10~250/1%]
008
Side1:SepDC [10~250/1%] [10~250/1%]
009
Side1:SepAC [10~250/1%] [10~250/1%]
012
Side2:PTR [10~250/1%] [10~250/1%]
013
Side2:SepDC [10~250/1%] [10~250/1%]
014
Side2:SepAC [10~250/1%] [10~250/1%]
2534
Thk:K:MH Thick Paper: K Medium High
2535
Thk:K:HH Thick Paper: K High
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute humidity from
the temperature/humidity sensor and the thresholds set with SP2304.
SP2534 – More than SP2304 003 Threshold 3, up to SP2304 004 Threshold 4
SP2535 – More than SP2304 004 Threshold 4
These settings apply 1) only where the image is created in black (in either black-and-
white or full-color mode) on plain paper.
SP2534 SP2535
007
Side1:PTR [10~250/1%] [10~250/1%]
008
Side1:SepDC [10~250/1%] [10~250/1%]
009
Side1:SepAC [10~250/1%] [10~250/1%]
012
Side2:PTR [10~250/1%] [10~250/1%]
013
Side2:SepDC [10~250/1%] [10~250/1%]
014
Side2:SepAC [10~250/1%] [10~250/1%]