Filter
Top Products
SERVICE PROGRAM TABLES August, 2006
5-158
T:FIN Jobs [0~9999999/ 1] 8 061
These SPs total the finishing methods. The finishing method is
specified by the application.
C:FIN Jobs [0~9999999/ 1] 8 062
These SPs total finishing methods for copy jobs only. The finishing
method is specified by the application.
P:FIN Jobs [0~9999999/ 1] 8 064
These SPs total finishing methods for print jobs only. The finishing
method is specified by the application.
S:FIN Jobs [0~9999999/ 1] 8 065
These SPs total finishing methods for scan jobs only. The finishing
method is specified by the application.
Note: Finishing features for scan jobs are not available at this time.
L:FIN Jobs [0~9999999/ 1] 8 066
These SPs total finishing methods for jobs output from within the
document server mode screen at the operation panel. The finishing
method is specified from the print window within document server
mode.
O:FIN Jobs [0~9999999/ 1] 8 067
These SPs total finishing methods for jobs executed by an external
application, over the network. The finishing method is specified by
the application.
8 06x 1 Sort Number of jobs started in Sort mode. When a stored
copy job is set for Sort and then stored on the document
server, the L: counter increments. (See SP8 066 1)
8 06x 2 Stack Number of jobs started out of Sort mode.
8 06x 3 Staple Number of jobs started in Staple mode.
8 06x 4 Booklet Number of jobs started in Booklet mode. If the machine
is in staple mode, the Staple counter also increments.
8 06x 5 Z-Fold Number of jobs started In any mode other than the
Booklet mode and set for folding (Z-fold).
8 06x 6 Punch Number of jobs started in Punch mode. When Punch is
set for a print job, the P: counter increments. (See SP8
064 6.)
8 06x 7 Other Reserved. Not used.