Filter
Top Products
SERVICE PROGRAM TABLES August, 2006
5-132
Group 6000
6006
ADF Reg Adj ADF Registration Adjustment
001
ADF Main Reg Adj Adjusts the side-to-side registration for the front/back in ADF
mode.
[–3~+3/0.1 mm]
003
ADF Sub Reg Adj Adjusts the vertical registration for the front/back in ADF
mode.
[–30 ~+30/0.17 mm]
-30 = -5.1 mm
+30 = +5.1 mm
005
ADF Buck Adj:Front Adjusts the roller timing at the skew correction
sensor/entrance roller. A higher setting causes more
buckling.
[–12.0~+12/0.25 mm]
-12 = -3.0 mm
+12 = +3.0 mm
006
ADF Buck Adj:Back Adjusts the roller timing at the interval sensor/scanning roller.
A higher setting causes more buckling.
[–8.0~+8/0.25 mm]
[–8.0~+8/0.25 mm]
-8 = -2 mm
+8 = +2 mm
007
ADF TEdge EMargin These settings adjust the erase margin for the trailing edges
for the front/back.
[–20~+20/0.5 mm]
-20 = -10 mm
+20 = +10 mm
6007
ADF Input Chk ADF Input Check
Displays signals received from sensors and switches in the ADF. (5.7.1)
6008
ADF Output Chk ADF Output Check
Turns on the ADF electrical components individually for testing. (5.7.2)
6009
ADF Free Run ADF Free Run
This SP does an ADF free run in duplex original mode.
001
Simplex
002
Duplex
6016
ADF OrgSizePrior ADF Original Size Detection Priority
Allows selection of alternate settings for automatic original size detection. (6.4.3)
6017
ADF Mag Adj ADF Magnification Adjustment
001
ADF Sub Mag Adj This changes the magnification by adjusting the speed of
scanning.
[–50(–5%)~+50(+5%)/0.1%]