Filter
Top Products
4-19
4
1
Display the DIAL TYPE Menu.
Press: then
Dial Type Entry
There are two types of dialing modes: MF (Multi-frequency) and DP (Dial Pulse).
If your telephone emits tones when you are dialing, this usually indicates that you have a MF type
(default setting). Otherwise, you will have to select the DP setting.
2
Select your dial type.
• For Multi-Frequency type, press . (default)
• For Dial Pulse type, press
.
3
Enter any “DELETE ACCESS DIGIT” number.
• Access digit are numbers which are required by PBX
systems to access the phone system “outside” the PBX.
• Access digits such as 9 and pause need to be omitted when
using the chain dialing function.
• If you do not require the “DELETE ACCESS DIGIT” function,
press the
key to skip this setting.
DIAL TYPE
1.MF
2.DP
FAX SETUP
03.ECM
04.DOCUMENT MODE
05.DIAL TYPE
DIAL TYPE
DELETE ACCESS DIGIT
ACCESS DIGIT(MAX10):