Filter
Top Products
4-35
4
With the Send After Scan Mode Default Setting set to “OFF”, this feature allows you enable the Send
After Scan mode for a single transmission. Once that transmission is complete, the default status is re-
gained.
With Send After Scan selected, every page of the document will be scanned into memory before dialing
will begin.
With Send After Scan set to OFF (NO), your facsimile will begin dialing after the first page is scanned to
memory.
2
Place the original.
• For details on how to place the originals on the glass.
( See page 2-8.)
3
Set the scanning conditions. ( See pages 2-10 to
2-15.)
4
Press the key (on the Function key panel).
5
Select the SEND AFTER SCAN option.
• To disable Send After Scan, press .
• To enable Send After Scan, press
. Go to Step 6.
6
Select the Memory Full option.
• To delete the pages that have been scanned, press .
• To send the pages already scanned, press
.
7
Specify the remote FAX. ( See pages 2-16 to
2-21.)
ENTER TEL NUMBER(MAX128):
FEB25-2001 11:30AM M: 100%
RESOLUTION:STANDARD
:AUTO
COMM.OPTION
WHEN MEMORY FULL
1.DELETE SCAN PAGES
2.SEND SCAN PAGES
SEND AFTER SCAN
1.OFF
2.ON
1
Press the key.
Enabling or Disabling Send After Scan Temporarily