A SERVICE OF

logo

Replacement Procedures
4.5 Wireless LAN card
Removing a Wireless LAN card
The following describes the procedure for removing a Wireless LAN card (See Figure 4-6).
1. Remove the following screw of wireless cover securing wireless LAN card cover
and remove it.
2.5.0 x 4.0B BIND screw x2
2. Disconnect the wireless LAN antenna cable Main (Black cable) and AUX (White
cable) from the connectors on a wireless LAN card.
3. Open the left and right latches holding a wireless LAN card and remove a wireless
LAN card from the connector CN27 on the system board.
A
UX
MAIN
Wireless LAN card cover with
2 screws
Latch
CN27
Wireless LAN card
Wireless LAN antenna
cable (white cable)
Wireless LAN antenna
cable (black cable)
Figure 4-5 Removing a wireless LAN card
160 Satellite L20 Maintenance Manual(960-Q01)