Filter
Top Products
Replacement Procedures
168 Satellite L20 Maintenance Manual(960-Q01)
Installing the keyboard
The following describes the procedure for installing the keyboard (See Figure 4-9 to 4-110).
1. Turn the keyboard upside down and place it on the palm rest as its face down.
Connect the keyboard flexible cable to the connector CN3200 on the system board.
2. Install the keyboard support plate and secure it with the following screws.
• M2.5×8.0B FLAT BIND screw x2
3. Turn the keyboard face up and put it on the computer. Make sure that there is no
space between the keyboard and the computer.
4. Secure the keyboard with the following screws.
• M2.5×2.8B FLAT BIND screw x2
5. Slide and set the speaker cover assembly and secure it with the following screw.
• M2.5×4.0B FLAT BIND screw x1
6. Install the keyboard brace by pressing it from the topside.