Filter
Top Products
Test Program for Field.
86 Satellite L20 Maintenance Manual(960-Q01)
Use the arrow keys to highlight the desired option and press Enter.
Go To Test
Move the highlight bar to Go To Test and press Enter to start executing the test.
Test Loop
Select NO to return the screen to the subtest menu after the test is complete.
Select YES to set the test to run continuously until it is halted by the user.
Error Stop
Select NO to keep the test running even if an error is found.
Select YES to stop the test program when an error is found and display the HALT
OPERATION screen as shown below:
[[ HALT OPERATION ]]
1: Test end
2: Continue
3: Retry
These three selections have the following functions:
1: Terminates the test program and exits to the subtest menu.
2: Continues the test from the error.
3: Restarts the test from the beginning.
Use the arrow keys to move the cursor to the desired option and press Enter.
Table 3-1 in Section 3.3 lists the function of each test on the subtest menu. Table 3-2 in
Section 3.15 lists the error codes and error status for each error.
[ DIAGNOSTICS MENU ]
01. DIAGNOSTIC TEST
02. RUNNING TEST
03. DISK UTILITIES
04. LOG UTILITIES
05. SYSTEM CONFIGURATION
06. OPTION
99. EXIT
TOSHIBA Satellite(Pro) L20/L25 Diagnostics
Version V1.00 (C) Copyright QUANTA Corp. 2005-
[ DIAGNOSTIC TEST MENU ]
01. SYSTEM TEST 09. REAL TIME CLOCK TEST
02. MEMORY TEST 10. NPX TEST
03. KEYBOARD TEST 11. HIGH RESOLUTION DISPLAY TEST
04. DISPLAY TEST 12. MULTIMEDIA TEST
05. FLOPPY DISK TEST 13. USB TEST
06. HARD DISK TEST 14. MEMORY2 TEST
07. REAL TIME CLOCK TEST 88. FDD&HDD ERROR RETRY COUNT SET
99. EXIT TO DIAGNOSTICS MENU
[ SYSTEM TEST ]
01. FAN ON/OFF
02. Battery Test
03. CPU Temperature
99. Exit to DIAGNOSTIC TEST MENU
01. FAN ON/OFF
0
1
.
S
Y
S
TEM TE
S
T
: :Select item
ESC :Escape
[ TEST PARAMETER ]
01. Go To Test
02. Test Loop : YES
03. Error Stop : NO
0
1
.
Go
T
o
T
est