Filter
Top Products
User's Manual
4-28
OPERATING BASICS
❑ Clean the computer using a slightly damp (with water) cloth. You can use glass
cleaner on the display. Spray a small amount of cleaner on a soft, clean cloth
and wipe the screen gently with the cloth.
CAUTION: Never spray cleaner directly onto the computer or let liquid
run into any part of it. Never use harsh or caustic chemical products to
clean the computer.
Moving the computer
The computer is designed for rugged durability. However, a few simple precautions
taken when moving the computer will help insure trouble-free operation.
❑ Turn off the computer. Do not carry the computer with power on or in stand by
state. Do not carry the computer while DISK indicator is glowing.
❑ Do not expose the computer with rapid temperature change (such as the case to
bring the PC from cold outside into warm room).
When rapid temperature change is unavoidable, turn on the computer after a
couple of hours.
❑ Remove all external peripheral devices and their connection cables from the
computer before carrying. If an optical disk is inserted in an optical disk drive,
eject it.
❑ Do not drop the computer nor apply excessive impact on the computer. Do not
leave the computer in an automobile where the computer is exposed to direct
sunbeam.
❑ Close the display panel when carrying.
❑ Do not put the computer in Tablet mode in a bag.
Heat dispersal
To protect from overheating, the CPU has an internal temperature sensor. If the
computer’s internal temperature rises to a certain level, the cooling fan is turned on
or the processing speed is lowered. You can select whether to control the CPU
temperature by turning on the fan first, then if necessary, lowering the CPU speed.
Or, by lowering the CPU speed first, then if necessary, turning on the fan. Use the
Cooling Method item of the Basic Setup tab in TOSHIBA Power Saver.