Filter
Top Products
4-23
O
PERATING
B
ASICS
Figure 4-16 Microphone window
Power management
The audio controller can be powered down when the audio function is idle. To
enable the Audio Power Management, follow the steps below.
1. Clicked the Power Management tab.
2. Select the Normal Power Savings in the Power Mode pull-down list.
NOTE: If the No Power Savings
is selected, the audio controller
always runs.
If you want to a more effect for the power management, you can select another
mode, the High Power Savings which can save the power than the Normal
Power Savings. To select it, follow the steps below.
1. Clicked the Power Management tab.
2. Select the High Power Savings in the Power Mode pull-down list.
3. Input a time in Power Save Delay (Seconds).
NOTE: If the High Power Saving is selected, you need to play an
audio file once before you use a microphone or play an audio CD by the
analog CD audio.
Using the microphones